# Fasteners manufacturers + exporters **URL:** \ **Category:** Business Directory\ **Created:** [November 1, 2024, 2:05pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720 "2024-11-01T14:05:25Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Fastenerholic](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/f/a88e57/32.png) [@Fastenerholic](https://tw.forumosa.com/u/Fastenerholic)\ **Post date:** [November 1, 2024, 2:05pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/1 "2024-11-01T14:05:25Z")
Hello, just by any chance if anyone could share a personal contact of someone who deals with manufacture or export of smaller fasteners in larger quantities into Europe. I would be veeery grateful and also some money can be made on both sides 😃 ---
**Author:** ![arcticsquid](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/arcticsquid/32/2246_2.png) [@arcticsquid](https://tw.forumosa.com/u/arcticsquid)\ **Post date:** [November 1, 2024, 2:48pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/2 "2024-11-01T14:48:52Z")
[https://www.fontec.com.tw/h/Index?key=568296780703](https://www.fontec.com.tw/h/Index?key=568296780703) The office was next door to my previous work. Not sure whether they can communicate in English. ---
**Author:** ![Taiwan\_Luthiers](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/t/73ab20/32.png) [@Taiwan\_Luthiers](https://tw.forumosa.com/u/Taiwan_Luthiers)\ **Post date:** [November 1, 2024, 3:04pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/3 "2024-11-01T15:04:46Z")
I see a lot of screw/fastener shop around Taipei. A few around Chengde rd near Shuanlian MRT station. I’m sure they have contacts for larger quantity too. ---
**Author:** ![Andrew](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/andrew/32/179806_2.png) [@Andrew](https://tw.forumosa.com/u/Andrew)\ **Post date:** [November 1, 2024, 10:20pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/4 "2024-11-01T22:20:25Z")
> [@Taiwan\_Luthiers](#): > > I see a lot of screw/fastener shop around Taipei. A few around Chengde rd near Shuanlian MRT station. I’m sure they have contacts for larger quantity too. Aren’t they just small retail shops? It sounds like OP is looking for a manufacturer, or at most an exporter. Quite different. ---
**Author:** ![Shaun008](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/shaun008/32/209482_2.png) [@Shaun008](https://tw.forumosa.com/u/Shaun008)\ **Post date:** [November 1, 2024, 11:03pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/5 "2024-11-01T23:03:47Z")
Here is a list form this years fastener expo in Kaohsiung, at the show they normally have people that speak English, but don’t know if there are on staff full time. Maybe go through and search them online > **[Taiwan International Fastener Show-Exhibitor List](https://www.fastenertaiwan.com.tw/en/exhibitor/show-area-grid/Nuts,%20Bolts%20and%20Screws/list.html)** > > Taiwan International Fastener Show-Exhibitor List ---
**Author:** ![Mr\_PBH](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/mr_pbh/32/230938_2.png) [@Mr\_PBH](https://tw.forumosa.com/u/Mr_PBH)\ **Post date:** [November 1, 2024, 11:46pm UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/6 "2024-11-01T23:46:13Z")
> [@Fastenerholic](#): > > I would be veeery grateful and also some money can be made on both sides Nice! Now— what’s a fastener? đŸ€‘ ---
**Author:** ![Andrew](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/andrew/32/179806_2.png) [@Andrew](https://tw.forumosa.com/u/Andrew)\ **Post date:** [November 2, 2024, 12:05am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/7 "2024-11-02T00:05:40Z")
> [@Mr\_PBH](#): > > Nice! > > Now— what’s a fastener? đŸ€‘ You’ve never attended the Taiwan International Fastener Show? It’s a biennial highlight of living in Taiwan. Looks like you’ll need to wait until 2026 for the next one. đŸ„Č > **[Taiwan International Fastener Show](https://en.wikipedia.org/wiki/Taiwan_International_Fastener_Show)** > > Taiwan International Fastener Show (Fastener Taiwan; Chinese: ć°çŁćœ‹éš›æ‰Łä»¶ć±•) is one of the world's largest professional trade fairs focused on the fastener industry. It takes place biennially in the Kaohsiung Arena in Kaohsiung, Taiwan. The show is organized jointly by TAITRA, Taiwan External Trade Development Council, and TIFI, Taiwan Industrial Fastener Institute. > Among its counterparts, the National Industrial Fastener Shows in Las Vegas, and the Fastener Fair Stuttgart, Fastener Taiwan stands out ... ---
**Author:** ![Mr\_PBH](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/mr_pbh/32/230938_2.png) [@Mr\_PBH](https://tw.forumosa.com/u/Mr_PBH)\ **Post date:** [November 2, 2024, 12:11am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/8 "2024-11-02T00:11:00Z")
Small cup bras? ---
**Author:** ![Shaun008](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/shaun008/32/209482_2.png) [@Shaun008](https://tw.forumosa.com/u/Shaun008)\ **Post date:** [November 2, 2024, 12:21am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/9 "2024-11-02T00:21:25Z")
> [@Mr\_PBH](#): > > Now— what’s a fastener? đŸ€‘ It’s US English for a fastening, or a fastener could be the person doing the fastening, could be quite festinating. ---
**Author:** ![arcticsquid](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/arcticsquid/32/2246_2.png) [@arcticsquid](https://tw.forumosa.com/u/arcticsquid)\ **Post date:** [November 2, 2024, 2:09am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/10 "2024-11-02T02:09:57Z")
Screws, bolts, washers and nuts, clip-ons, anchor bolts, locking pins, locking screws, pins
. You know small metal stuff. ---
**Author:** ![Mr\_PBH](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/mr_pbh/32/230938_2.png) [@Mr\_PBH](https://tw.forumosa.com/u/Mr_PBH)\ **Post date:** [November 2, 2024, 2:14am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/11 "2024-11-02T02:14:49Z")
Oh man— no wonder I can’t work a bra . ---
**Author:** ![Taiwan\_Luthiers](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/t/73ab20/32.png) [@Taiwan\_Luthiers](https://tw.forumosa.com/u/Taiwan_Luthiers)\ **Post date:** [November 2, 2024, 2:33am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/12 "2024-11-02T02:33:55Z")
A lot of these shops would be happy to be a middleman for large qty exports
 they really don’t make much money from random folks buying 10-20 M6 bolts every so often. I daresay most their business is from factories ordering truckloads of them. It’s better than waiting until 2026 for the next fastener show. But I did pass by a few factories in Xinjhuan making nuts and bolts
 ---
**Author:** ![Andrew](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/andrew/32/179806_2.png) [@Andrew](https://tw.forumosa.com/u/Andrew)\ **Post date:** [November 2, 2024, 3:06am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/13 "2024-11-02T03:06:08Z")
> [@Taiwan\_Luthiers](#): > > A lot of these shops would be happy to be a middleman for large qty exports
 they really don’t make much money from random folks buying 10-20 M6 bolts every so often. I daresay most their business is from factories ordering truckloads of them. Trying to make my point kindly clearly didn’t work for you, so here’s a more blunt version: I’m certainly no expert either, but I think you don’t know what you’re talking about. Hardly the first time. I don’t know why you insist on doing this. Calling up a small neighborhood retail store to ask them about being a middleman for exporting overseas in large quantities is just an absurd suggestion, and it’s completely different from selling larger amounts to Taiwanese factories. Most of these small shops aren’t going to have a clue about exporting stuff overseas, and there’s definitely going to be a language barrier. I’m skeptical also that “most their business is from factories ordering truckloads of them”. For “truckloads”, any competent Taiwanese factory is just going to go to the manufacturer because it’s cheaper. And that’s what OP should be doing too. Paying more to involve an intermediate company that doesn’t know how to export stuff or deal with foreign customers and likely doesn’t speak English is just ridiculous and unnecessary. > [@Taiwan\_Luthiers](#): > > It’s better than waiting until 2026 for the next fastener show. Nobody is suggesting this. For Christ’s sake, please properly read what you’re responding to for once. The reason for posting the link to the show was because there’s a directory of manufacturers/exporters, which OP can then go through and contact those that look suitable. These are companies deliberately targeting overseas buyers. Even if your suggestion was sensible, which it’s not, you haven’t really given OP very much to go on, have you? They’re clearly based in Europe not Taipei — are they supposed to look on Google Maps around the vague area you’ve suggested for things that look like fastener shops then call them up
? ---
**Author:** ![Mr\_PBH](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/mr_pbh/32/230938_2.png) [@Mr\_PBH](https://tw.forumosa.com/u/Mr_PBH)\ **Post date:** [November 2, 2024, 3:06am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/14 "2024-11-02T03:06:22Z")
> [@Taiwan\_Luthiers](#): > > A lot of these shops would be happy to be a middleman How would that help the OP? ---
**Author:** ![Wilsonckao](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/w/258eb7/32.png) [@Wilsonckao](https://tw.forumosa.com/u/Wilsonckao)\ **Post date:** [November 2, 2024, 10:02am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/15 "2024-11-02T10:02:56Z")
visit your local industry relevant exhibition and find a company who knows a company ---
**Author:** ![arcticsquid](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/arcticsquid/32/2246_2.png) [@arcticsquid](https://tw.forumosa.com/u/arcticsquid)\ **Post date:** [November 5, 2024, 4:18am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/16 "2024-11-05T04:18:50Z")
![IMG_4859](https://forumosauploads-12829.kxcdn.com/original/3X/b/9/b969b4bf5506ab43b2299a84025fef510f8e4e5d.jpeg) Nuts are one kind of fasteners. Usually (not always) paired with bolts. ---
**Author:** ![Taiwan\_Luthiers](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/t/73ab20/32.png) [@Taiwan\_Luthiers](https://tw.forumosa.com/u/Taiwan_Luthiers)\ **Post date:** [November 5, 2024, 4:55am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/17 "2024-11-05T04:55:55Z")
If you absolutely need it to not come loose, none of those lock washer/nuts actually work. You would need safety wire to ensure this. Aircraft nuts/bolts are usually safety wired. ---
**Author:** ![Andrew](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/andrew/32/179806_2.png) [@Andrew](https://tw.forumosa.com/u/Andrew)\ **Post date:** [November 5, 2024, 5:01am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/18 "2024-11-05T05:01:08Z")
> [@Taiwan\_Luthiers](#): > > If you absolutely need it to not come loose, none of those lock washer/nuts actually work. You would need safety wire to ensure this. Aircraft nuts/bolts are usually safety wired. It’s a joke TL. No need to explain this. đŸ«Ł ---
**Author:** ![Mr\_PBH](https://forumosa-12829.kxcdn.com/user_avatar/tw.forumosa.com/mr_pbh/32/230938_2.png) [@Mr\_PBH](https://tw.forumosa.com/u/Mr_PBH)\ **Post date:** [November 5, 2024, 5:36am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/19 "2024-11-05T05:36:09Z")
Wow— you know your way around nuts! ---
**Author:** ![Fastenerholic](https://forumosa-12829.kxcdn.com/letter_avatar_proxy/v4/letter/f/a88e57/32.png) [@Fastenerholic](https://tw.forumosa.com/u/Fastenerholic)\ **Post date:** [November 14, 2024, 10:11am UTC](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720/20 "2024-11-14T10:11:51Z")
Yes, that’s what I went through and contancted some of the more promising manufacturers. Sadly I did not find non-official contact who would deal lower prices and check the quality for us. [Next page](https://tw.forumosa.com/t/fasteners-manufacturers-exporters/245720.md?page=2)